Start off by stacking your large fuel logs on the bottom of the fire grate. Stack smaller logs on top. Add a kindling layer (small twigs about the size of your pinky or bigger) on top of the stack. Add some planks of cedar board.
Step 1, Fill a plastic spray bottle with water. Use a medium-size spray bottle as opposed to a cup or bucket to prevent splashing or excessive steam. Make sure there's enough water inside the spray bottle to extinguish the fire and dampen the firewood.Step 2, Spread the firewood and embers in the fireplace with a fire poker. You want the firewood and embers to be as open and flat as possible so they cool faster.Step 3, Spray the fire with water using the spray bottle. Continue spraying
The Best Way to Start a Fire in a Wood Stove. In a top-down fire, the larger logs are placed on the bottom, with progressively smaller logs, kindling and then newspaper added on top. The newspaper is lit, and the fire slowly burns down to the large logs below.
What is the best way to start a fire in a fireplace with real wood when you have no kindling to get it started My husband and I just bought a house with a fireplace. I had to put in some mortar and I need to cure it.
To properly pre-heat your flue, you should build your fire stack inside the fireplace or wood stove as usual with paper, fire starters, kindling, or whatever your particular startup procedure is. Before lighting the stack, keep a couple pieces of newspaper nearby to roll up to act as torches.
You can even cut up a wax firelog to make your own starters. If the starters are placed among split pieces of dry wood, the fire will start reliably. The conventional kindling fire. The goal when lighting a wood fire is to achieve quick ignition of the load without fussing or waiting for it to catch.